Hi all, I have finally got myself an Inca tech claymore Iss 6 coming and it is in beautiful condition. Got in ebay last for £150. Im going to do upgrades on it myself. Hopefully Colin will tell me whats parts i need to do this. When i get i shall post pictures of it
This is what you need plus any suspect duff or fadding parts-
4 of PCB for FET conversation, 4 new FETs, 4 of 10,000uF caps at 50V, 4 off 220uF at 50V, 4 off 470uF at 35V, 4 off 10uF 35V, 2 of bi-polar caps at 10uF 16V , 4 off ceramic TO247 pads, drill 4 holes in pcb and move track. 4 of 6amp diodes, drill heat sink brackets. 12 off 1.2mm pins 20mm long bent at 90deg for 4mm., solder and 5 hrs work.
Comments
4 of PCB for FET conversation, 4 new FETs, 4 of 10,000uF caps at 50V, 4 off 220uF at 50V, 4 off 470uF at 35V, 4 off 10uF 35V, 2 of bi-polar caps at 10uF 16V , 4 off ceramic TO247 pads, drill 4 holes in pcb and move track. 4 of 6amp diodes, drill heat sink brackets. 12 off 1.2mm pins 20mm long bent at 90deg for 4mm., solder and 5 hrs work.
Go man go