Is there anybody wanting to build a M100 Kit Mk1
This is a general enquiry if I did a vid on how to build a M100 Kit version would anybody be interested and motivated enough to take the build on?
It looks like you're new here. If you want to get involved, click one of these buttons!
Comments
But realistically would struggle to find the time required. Have just started a foundation degree course and struggling to fit it in around the day job already!
Possibly next summer...?
Solid.
Significant heat sinking capacity... :-/
Hmmm,
This...?
https://tanks-alot.co.uk/product/russian-t54-main-battle-tank/
And with two metres space between components
I have 4 sets left to sell there is 4 PCB,s on a single 2oZ PTH plater.
Two Power Amps
One SSR and DC Blocker with filters
One control pcb, allows you to turn ON/OFF Change bias setting from A to A/B. select Phono or balance inputs.
Chassis are you choice but I will recommend some when I decide I like them.
Max O/P 75W/Ch 8R, 140W/4R, 265W/2R
Max recommend A class setting max of 30W it will get warm so chassis and heatsink important.
BOM being done now. with ref to FEC,RS,Anglia,and CPC sorry no Maplin
Min Transformes 2 off 300VA max transformer 4 at 1KVA ach.
Max current at 20V RMS and no fuses just a bit shy of 98Amps cont( need 4 + 1KVA tranys)
The cost mmm PCB are not cheap still working it out,.
Parts that will be your costing and haggling talents.
https://seca.freeforums.net/thread/245/anybody-wanting-build-m100-kit?page=1&scrollTo=661
The next broken free PCB is the Control PCB.
Below that is the Power Amp PCB one channel shown.
Next page down is the SSR DC Blocker.
Here is a simple version of the BOM for all the board, remember you will need two sets for the power, (BOM parts)
BOM for the control PCB
And SSR DC Blocker PCB
(They sound OK too. ;-) )